avis 4.4 (1k reviews)

–15% now with the code BF15

GU10 Bulb: Lumens, Beam Angle, GU10 vs MR16 and How to Change One

Conseils et astuces

Evening hallway with an oak bench against an off-white plastered wall, a woven basket and a folded throw on the seat, leather boots below, and a small gold-coloured brass wall spot casting a warm cone of light down onto the bench

A GU10 bulb is a reflector bulb about 5 cm across that runs straight off the 230 V mains, with no transformer. Its two short pins with rounded heads, 10 mm apart, lock into the lampholder with a quarter turn. In LED, you need 330 to 345 lumens to replace a 50 W halogen, and the beam angle decides the shape of the pool of light.

In Irish homes, the B22 bayonet is the standard cap for ordinary bulbs; the GU10 lives in spotlights: kitchen and bathroom downlights, track spots, adjustable wall spots or the end of a tube wall light. Most people pick it by its watts, yet on a wall three other figures count far more: lumens, beam angle and colour temperature.

What is a GU10 bulb?

The name is a code. G stands for a base with pins, and 10 for the distance between their centres: 10 mm, as set out in the data sheet of IEC 60061-1, the international standard for lamp caps. The pins are short and thick, with a rounded head: push the bulb straight in, then twist it a quarter turn until it locks.

The front is a reflector about 5 cm wide, the size of the old PAR16 and MR16 halogen spots. To be sure of the cap, read the box, which must state the cap and the supply (for example 230 V AC 50 Hz) under Regulation (EU) 2019/2020. At a glance, an MR16 has two thin straight pins and a B22 two small lugs on a smooth cylinder.

GU10 vs MR16: two caps that do not swap

Both bulbs share the same 5 cm head, and shops often call both “MR16”. Behind it, everything differs: the MR16 with a GU5.3 cap runs on 12 V from a transformer, the GU10 on the mains.

FeatureGU10MR16 (GU5.3)
Voltage230 V, straight off the mains12 V, through a transformer
Fixing2 pins with rounded heads, quarter turn2 thin pins, pushed in
Distance between pins10 mm5.33 mm
Reference output for “35 W”200 lm300 lm
Reference output for “50 W”300 lm540 lm

The last two rows come from Commission Delegated Regulation (EU) 2019/2015, Annex V, Table 4, and reveal a trap: a “50 W equivalent” does not promise the same light on both caps, because the 12 V halogen was more efficient than the mains one.

The caps differ on purpose, so that a 12 V bulb never receives 230 V. Converting GU5.3 spots to GU10 means removing transformers and changing lampholders: a job for a Registered Electrical Contractor, whom you can check on the Safe Electric register.

Reading the box: lumens, kelvins, CRI and dimming

A GU10 is a directional light source, so Regulation (EU) 2019/2020 counts its useful output in a 90° cone when the beam is narrower than 90°. To claim “50 W equivalent”, an LED GU10 must reach in that cone the output of the PAR16 halogen, raised by an ageing factor of 1 + 0.5 × (1 − LLMF), LLMF being the share of light the LED keeps at the end of its life (Regulation (EU) 2019/2015, Annex V, Tables 4 and 5).

Old halogen GU10Reference (90° cone)LED keeping 80% at end of lifeLED keeping 70% at end of life
35 W200 lm220 lm230 lm
50 W300 lm330 lm345 lm

So for a 50 W halogen, look for 330 to 345 lumens, which an LED gives from about 4.3 W at 80 lumens per watt. On for 3 hours a night, a 5 W GU10 uses 5.5 kWh a year, against 54.8 kWh for a 50 W halogen.

Our advice on colour temperature: 2,700 K in a living room, bedroom or hall, 3,000 K if that looks too orange on a white wall, 4,000 K only over a worktop, and the same value at both ends of an up-and-down light. Our cosy living room ideas start from that warm glow. Since September 2021, Regulation (EU) 2019/2020 requires a CRI of at least 80 for light sources sold in the EU; for a painting, wood or a coloured wall, aim for 90. On a dimmer, use a GU10 marked dimmable: the box must say when a bulb cannot be dimmed.

Beam angle: 36° for an accent, 60° for a wash

The beam angle, printed on the box, sets the width of the pool of light: diameter = 2 × distance × tan(angle ÷ 2). Take a 30 cm up-and-down wall light with two GU10s, centred 1.50 m above the floor under a 2.50 m ceiling: its top is 85 cm from the ceiling, its bottom 1.35 m from the floor.

GU10 beam anglePool on the ceiling (85 cm)Pool on the floor (1.35 m)
24°Ø 36 cmØ 57 cm
36°Ø 55 cmØ 88 cm
60°Ø 98 cmØ 156 cm
Scale drawing of two walls with a 30 cm up-and-down wall light centred at 1.50 m under a 2.50 m ceiling: with 36° GU10s, a 55 cm pool on the ceiling and 88 cm on the floor; with 60° GU10s, 98 cm on the ceiling and 156 cm on the floor
Drawn to scale. With two 60° GU10s, the pool on the ceiling is almost twice as wide as with 36°: the light spreads out, and the bright spot just above the fitting disappears.

At the centre of the beam, lux equal the peak intensity in candelas (listed in the EU database EPREL) divided by the distance in metres squared: a 36° GU10 of 800 cd gives about 1,100 lux on a ceiling 85 cm away, a 60° one of 280 cd about 390 lux. Our advice: towards a nearby ceiling, choose a wide beam, or the bright spot above the light will catch your eye every time you look up.

A narrow beam wins when a spot aims at something: at 1 m, 36° draws a circle 65 cm across, the size of a picture or of a book in your hands. That is the setting for a reading wall light.

Adjustable gold-coloured brass wall spot on an off-white plastered wall in the evening, its slim tube tilted down, casting a cone of warm light on the wall and a circle on an oak hall bench with a folded wool throw and a woven basket
Our adjustable wall light in gold-coloured brass, shown at its real size above a hall bench: a tube 2.9 cm across with its supplied LED, too slim for a GU10, tilted to land a narrow circle of light on the seat.

How to change a GU10 bulb

Swapping a halogen GU10 for an LED one needs no tools:

  1. switch the light off, and if you are unsure which switch it is, turn off the lighting circuit at the consumer unit;
  2. let a halogen cool down: its glass runs hot enough to burn;
  3. push the bulb gently in, turn it a quarter turn anticlockwise and pull it out;
  4. check that the LED fits the depth of the fitting, as some are longer than the halogen they replace;
  5. line up the pins, push in and turn clockwise until it stops, without forcing.

Stay within the maximum wattage marked on the fitting: in a closed tube or a fire-rated downlight, a 5 W LED runs cooler than a 9 W one. Changing a bulb is not electrical work, but a scorched holder, a buzzing light or a new or moved fitting calls for a Registered Electrical Contractor: I.S. 10101, the National Rules for Electrical Installations, governs the fixed wiring.

GU10 wall lights and the alternatives in our range

If you would rather never change a bulb, a built-in LED does the GU10’s job, as in our LED wall lights. Three directional models show the choice:

In a bathroom, the fitting, not the bulb, must carry the IP rating required in its zone: I.S. 10101 treats the room as a special location, and electrical work there is Restricted Electrical Works under S.I. No. 264 of 2013, reserved to a Registered Electrical Contractor. Choose the fitting with them from our bathroom wall lights, whose product pages give the IP rating.

GU10 bulb: frequently asked questions

How do you fit a GU10 LED bulb?

Switch the light off, line up the two pins with the lampholder, push the bulb in straight and turn it clockwise a quarter turn until it locks. To remove one, push gently, turn anticlockwise and pull.

How many lumens is a 50 watt GU10 bulb?

The EU reference for a 50 W mains halogen GU10 is 300 lumens in a 90° cone. An LED sold as its equivalent must give a little more to allow for ageing: 330 to 345 lumens.

Is GU10 being phased out?

No, the GU10 cap is still sold everywhere in LED. What has left the shops is the halogen GU10, which cannot reach the efficiency levels of the EU ecodesign rules, Regulation (EU) 2019/2020. An LED GU10 fits the same lampholder.

Can I replace GU10 halogen bulbs with LED?

Yes, an LED GU10 goes straight into a GU10 lampholder with no change to the wiring. Choose 330 to 345 lumens for a 50 W halogen, the same beam angle, a dimmable model on a dimmer, and check its length against the fitting.

Why do GU10 LED bulbs keep blowing?

The usual causes are heat in a closed fitting or fire-rated downlight, a non-dimmable bulb on a dimmer, and a worn lampholder. If bulbs keep failing in the same fitting, have it checked by a Registered Electrical Contractor.

How long should a GU10 LED bulb last?

The box gives the rated life in hours as L70B50: the age at which half of a batch has fallen below 70% of its initial output (Regulation (EU) 2019/2020, Annex I, point 60). Heat shortens it.

Sources

  • Commission Delegated Regulation (EU) 2019/2015 on the energy labelling of light sources, Annex V, Tables 3 to 7. Official Journal of the European Union
  • Commission Regulation (EU) 2019/2020 on ecodesign requirements for light sources, Annex I, points 3, 15, 16 and 60, and Annex II, Table 4 and point 3. Official Journal of the European Union
  • IEC 60061-1, Lamp caps and holders, Part 1: Lamp caps (GU10 and GU5.3 sheets). International Electrotechnical Commission
  • Bi-pin lamp base; Multifaceted reflector. Wikipedia
  • I.S. 10101:2020, National Rules for Electrical Installations, Part 7 (special locations). NSAI
  • S.I. No. 264 of 2013, Electricity Regulation Act 1999 (Restricted Electrical Works) Regulations 2013, Regulation 4. Irish Statute Book
  • Register of Registered Electrical Contractors. Safe Electric

Related products

Outdoor wall light

Cylindrical LED Wall Light with Dual Light Beams

€39.90 EUR
Industrial wall light

Adjustable Retro-Style Industrial Wall Light

€149.9 EUR
Bedroom wall light

Adjustable Wall Light in Gold-Coloured Brass

€89.9 EUR

Find out more

Conseils et astuces
Conseils et astuces
Wall light with a beige fabric shade on a gold-coloured back plate above an oak desk, its supply running straight down in slim trunking close to the wall colour
Conseils et astuces
Discover more articles
icon livraison

FREE DELIVERY

on orders over 65€

icon retours

RETURNS POSSIBLE

Within 14 days

icon paiement

SECURE PAYMENT

Paypal - Mastercard - SSL

icon retours

6D/7 ASSISTANCE - 8 A.M. - 6 P.M.

At your service

0